Flashings - perfect finishing of the roof and facade

Precisely made flashings used in the construction of facilities made of sandwich panels ensure:

  • adequate tightness of the building,
  • protection of the facade or roof against wind and dampness,
  • aesthetic finish of the structure.

We perform roofing work with high-quality sheet metal of many shapes and with almost any parameters.

See available items

Precise roofing flashings with any parameters

Roof or facade flashings tailored to the needs of the customer

any-length

Any length

Our machines make the production of flashings with a length of up to 6.4 m possible.

appropriate-material-thickness

Appropriate material thickness

We use a sheet with a thickness of 0.5 to 1.5 mm - depending on the intended use of a given element and customer specifications.

any-shape

Any shape

There is more than a wide selection of standard elements - we can produce flashings of any shape.

Roof and wall flashings on individual order

Do you need unusual sheet metal fittings? Contact us and we will produce it for you!

Contact Us

Rozbud modern machinery resources = the most comprehensive range of flashings on the market.

product roof ridge

Roof ridge

The top edge of the roof

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
product roof ridge underside

Roof ridge underside

Roof ridge underside flashing

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
Obrobki-blacharskie-pas-podrynnowy-plyta-z-podcieciem

Verge trim with an undercut

Eaves protection and leak protection.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
pas-podrynnowy-bez-podciecia

Verge trim, a plate without undercut

Protection against leakage and aesthetic finish of the roof.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
maskownica-okapu-z-zapora-sniezna

The eaves cover with a snow barrier

Aesthetic roof finish and protection against falling snow.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
maskownica-okapu

The eaves cover

A functional and aesthetic element of the roof finishing.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
pas-nadrynnowy

Roof-edge flashing

Effective water drainage and leak protection

  • Sheet thickness from 0.5 to 1.5 mm
  • Length from 2 to 6.4 m.

Contact us
wiatrownica-do-montazu-z-profilem-zamykajacym

Wind tie for assembly with a closing profile

Protection against damaging the roof and blowing out rainwater.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
wiatrownica-prosta

Straight wind tie

Effective protection of the side edges of the roof against leaking.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
profil-zamykajacy-do-wiatrownicy

Closing profile for the wind tie

Functional finish of the wind tie.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
MASKOWNICA-KALENICY

Ridge cover

Aesthetic finish and sealing of the roof ridge

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
MASKOWNICA-POLACZEN-PLYT

Panel connection cover

Aesthetic, tight finish for sandwich panels with visible fastening

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
NAROŻNIK- ZEWNĘTRZNY

External corner

Corner element for finishing the building structure.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
NAROZNIK-WEWNETRZNY

Internal corner

For finishing building corners.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
NAROZNIK-ZEWNETRZNY-MASKUJACY

Masking external corner

Protection against damage and masking of panel fasteners.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
OKAPNIK-PODWALINOWY

Drip cap flashing 1 and 2

Preventing dampness and water dripping.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
NAROZNIK-POLACZENIA-DACH-SCIANA-ROZWARTY

The obtuse corner of the connection between the roof and the wall

Finishing the connection between the roof and the wall made of sandwich panels.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
NAROZNIK-POLACZENIA-DACH-SCIANA-OSTRY

The corner of the roof and wall connection, acute

Protection of the connection between the roof and the wall in sandwich panel structures.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
LISTWA-STARTOWA

Fixing profile

An indispensable element of any sandwich panel construction.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us
OKAPNIK-KROTKI-NA-LISTWE-STARTOWA

Short drip cap for the fixing profile

Protection of the facade against water.

  • Sheet thickness from 0.5 to 1.5 mm.
  • Length from 2 to 6.4 m.

Contact us

We will execute orders for any roof and wall flashings

Ask us about customized sheet metal finishes.

Cookie settings
Adapt Settings
'Necessary' cookies are required for the website to function. Agreeing to the other categories will help us improve the functionality of the website. Third-party companies such as: Google, also store cookies. More information: data use and privacy.
Necessary cookies are required for the proper functioning of the website.
We use Google Analytics cookies. These cookies will only be stored in your browser with your prior consent.
Advertising cookies are used, among other things, to analyse the effectiveness of advertising activities and to track conversions.
Allows user data related to ads to be sent to Google

There is no cookies.

Enables personalised advertising

There is no cookies.

Save Your Settings Accept All
Cookie settings